CATEGORY
Inspection Item
| 1. Diameter, Hole diameter 2. Length 3. Width 4. Height, Thickness 5. Surface defect 6. Deformed, Broken 7. Different shape |
8 . Crack 9 . Burrs, Chips 10. Across Corner 11. Across Flat 12. Chamfer angle 13. Included angle 14. Arc radius |
15. Concentricity 16. Roundness 17. With coating 18. With mark 19. With cut 20. Parallel eage length 21. Broken pin, Recess depth |
22. With thread 23. Fine or coarse thread 24. Thread numbers 25. Pitch 26. Slanted thread 27. Minor diameter 28. Major diameter |
 |
 |
 |
 |
 |
 |
 |
 |
||
| With Thread/Thd Numders | Surface Defect | Different Shape | Length/ Width/ Thickness | With Coating | Broken Pin/Recess Depth | A/C , A/F Thread |
Dia./Pitch/Slant | ||
 |
 |
 |
 |
 |
 |
 |
 |
||
| Deformed, Broken | Crack | Diameter/ Roundness | Chamfer/ Included Angle | With Mark | Burrs, Chips | Concentricity | Arc Radius | ||
 |
 |
 |
 |
 |
 |
 |
 |
||
| Multi- Dimensions | Multi-Dimensions | Special Dimension | Special Dimension | Special Dimension | Special Dimension | Special Dimension | Special Dimension | ||
 |
 |
 |
 |
 |
 |
 |
 |
||
| Special Dimension | Special Dimension | Special Dimension | Special Dimension | Special Dimension | Special Dimension | Special Dimension | Special Dimension | ||